R&S®NV8600 UHF Transmitter Family for TV
High power - low consumption
Specifications
| Digital TV | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Configured as R&S® | NV8602 | NV8603 | NV8604 | NV8605 | NV8606 | NV8608 | NV8610 | NV8612 | NV8616 | NV8620 |
| Number of R&S®VH8600A1 amplifiers |
2 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 |
| Output power (RMS) for COFDM standards 1) 2) 3) |
1.3 kW | 1.9 kW | 2.6 kW | 3.1 kW | 3.7 kW | 5.0 kW | 6.1 kW | 7.2 kW | 9.7 kW | 11.8 kW |
| RF output for COFDM standards | EIA 1 5/8" | EIA 3 1/8" | ||||||||
| Output power (RMS) for ATSC/ATSC Mobile DTV 1) 2) 4) |
1.8 kW | 2.7 kW | 3.6 kW | 4.4 kW | 5.2 kW | 7.0 kW | 8.5 kW | 10.1 kW | 13.6 kW | 16.5 kW |
| RF output for ATSC/ATSC Mobile DTV | EIA 1 5/8" | EIA 3 1/8" | EIA 4 1/2" | |||||||
| Dimensions (H × W × D) |
2000 mm × 600 mm × 1100 mm (78.7 in × 23.6 in × 43.3 in) |
2000 mm × 1200 mm × 1100 mm (78.7 in × 47.2 in × 43.3 in) |
||||||||
1) Before bandpass filter.
2) With AC power supply of 3 × 400 V AC.
3) Average output power; at < 510 MHz, power reduced by approx. 10 %; at > 662 MHz, power increased by approx. 5 %.
4) Average output power; at < 510 MHz, power reduced by approx. 5 %; at > 662 MHz, power increased by approx. 6 %.
| Specifications | ||
|---|---|---|
| Digital TV | ||
| TV standards | DVB-T, DVB-T2, DVB-H, ISDB-T, ISDB-TB, DTMB, MediaFLO™, ATSC, ATSC Mobile DTV, | |
| Inputs | 4 × BNC, 75 Ω | |
| DVB-T2 | 2 × BNC, 75 Ω and 2 × RJ-45 | |
| Analog TV | ||
| TV standards | B/G, D/K, M, M1, N, I, I1 | |
| Color transmission | PAL, NTSC, SECAM | |
| Sound transmission | dual-sound coding in line with IRT or FM single sound and NICAM728 (−13 dB/−20 dB) or FM single sound (−10 dB) |
|
| Inputs | 2 × video (BNC, 75 Ω), 2 × audio (XLR, 3-contact) |
|
| General data | ||
| Frequency range | UHF bands IV/V | 470 MHz to 862 MHz |
| Power supply | with three-phase amplifiers (standard) | 3 × 400 V ± 15 % 1), 47 Hz to 63 Hz |
| with single-phase amplifiers (optional, for |
3 × 208 V – 10 %/+ 15 % 1) or 240 V – 15 %/+ 10 % 2) 47 Hz to 63 Hz |
|
| Max. installation altitude | 2000 m above sea level (> 2000 m on request) |
|
| Operating temperature range | +1 °C to +45 °C | |
| Relative humidity (max.) | 95 %, non-condensing | |
| Immunity 3) | to fast transients and burst in line with IEC 61000-4-4 | < 4 kV (AC supply), < 1 kV (signal inputs) |
| to surges in line with IEC 61000-4-5 |
balanced < 2 kV (e.g. L1-L2) unbalanced < 4 kV (e.g. L1-N) |
|
| Synchronization | ||
| Reference frequency | 10 MHz, 0.1 V to 5 V (Vpp) or TTL, BNC | |
| Reference pulse | 1 Hz, TTL, BNC | |
| Operation | ||
| Display, keypad and status LEDs | local operation and display | |
| Ethernet interface, RJ-45 | convenient operation, local or remote, via standard web browser | |
| optional | network management interface via SNMP | |
| Parallel remote-control interface | optional | floating contacts for messages and commands |
2) To be connected to an AC supply network with 120/240 V, 2w + N + PE.
3) With integrated AC supply overvoltage protection; more stringent requirements must be covered by additional on-site measures.
To comply with the applicable standards and limit values for the suppression of out-of-band emissions (and in the case of digital standards, also for maintaining the required shoulder distance), the transmitter may only be operated with suitable filters at the RF output.
